ITClub

[Tom Shannon] uses science as part of his art. One of his methods when painting is to use this radio controlled paint pendulum. He gave an interview at his studio, which we’ve embedded after the break, and goes into detail about this device. It has six different reservoirs that hold the paint colors. Each gravity-fed canister connects to a central nozzle with flexible tubing. The hand held control box has a slider for each color that moves a servo pinching each supply tube. This ingenuity keeps him creating even though Parkinson’s Disease has started to manifest itself with tremors in his hands.

It’s hard to make out the paintings seen above, but the ones on display in the video are pretty amazing. He mentions that anything can be loaded into the hoppers, including tomato sauce. Is anyone else thinking about large scale pizza constuction? This also reminds us of the mechanical bartenders we’ve seen in the past.

Trusted Platform Module based cryptography protects your secrets as well as your government’s secrets.  Well, it used to. [Christopher Tarnovsky] figured out how to defeat the hardware by spying on its communications. This requires physical access so it’s not quite as bad as it sounds, but this does reach beyond TPM to many of the security chips made by Infineon.  This includes peripheral security chips for Xbox 360 and some chips used in cell phones and satellite TV.

[Christopher] revealed his hack during his presentation at Black Hat 2010. The method is wicked-hard, involving removal of the chip’s case and top layer, then tapping into a data bus to get at unencrypted data. The chip still has some tricks up its sleeve and includes firmware traps that keep a look out for this type of attack, shutting down if it’s detected. Infineon commented that they knew this was possible but regard it as a low threat due to the high skill level necessary for success.

This looks like a home entertainment center of yore but something’s not quite right. Where is the turntable used to play the music? It turns out that this Danforth Standard Digitrola is digital and doesn’t rely upon wax for an input. [Jonathan Danforth] built it as a show piece and it exhibits fine craftsmanship. A sound driver uses the brass horn and the acoustical chamber to put out what sounds like a fine quality end product.  Hear it playing some Daft Punk in the video after the break. The music comes from an MP3 board inside that has a 50W amplifier and reads the music from an SD card. The only control available to the listener is the brass knob which controls the volume.

We just found this great portable multitouch rig called the portatouch. Made by a user at the NUI group website named [portatouch], this system uses a stripped down LCD as the display with IR LEDs edge lighting a touch surface in front of it. A camera mounted below the LCD picks up the reflections of the LEDs and converts it to touch points. While the implementation isn’t anything new, the package is really great. If you want to learn how to set up the technical side of it all, head over to the NUI group website and you’ll find all you want. We would love to see a more detailed breakdown of his rig though. The portability and quick construction are fantastic and seem like they could be reproduced without a ton of custom work.

[Manekinen] built a power supply monitor based around an AVR ATtiny13. Voltage and amperage are displayed on a 16×2 LCD character display (we’re not sure what the third number is… samples per second?). This is no small feat considering that the tiny13 is an 8-pin chip. He makes it happen by using the pins for both LCD control and ADC input. To make this happen the HD44780 compliant display is used in 4-bit mode. Check out the video after the break and hit up the non-translated page if you want to download the source code and PCB artwork. A note of warning, he’s using the RESET pin for I/O which means once you burn the fuses you’ll need a programmer that has High Voltage Serial Programming capabilities if you want to reprogram the chip.

“Everyone needs a hobby,” they tell us. For the blogger mysteriously identified only as “R,” that hobby would be an almost fanatical nostalgia for the Commodore 64 computer.

At first we thought this was a fan community site, but apparently it’s all the work of a single person. [R] has tweaked, extended, repackaged and resurfaced this 1980’s icon in nearly every imaginable way. They tend to gloss over the technical aspects of these mods, but that’s okay – the C64 is such an exhaustively documented system now that the site dwells mainly on the aesthetics and meaning of these reborn devices.

The 64 has made an indelible impression on electronic music, and the machines are still sought after by collectors, composers and circuit-benders. [R] pays homage by housing these vintage systems in styles reminiscent of even vintage-er synthesizers. Any one of these would warrant a post here, yet there’s a whole collection to browse. Check it out!

Meet GuruPlug, an all-in-one server that is now available for pre-order. This is the next generation of the popular SheevaPlug that features some added goodies. The base model sells for the same $99 and appears to have the same specs as the original but for $30 more, the GuruPlug Server PLUS moves to 2 Gigabit Ethernet ports, one eSATA connector, and built-in WiFi and Bluetooth. All of this for $129 and it only pulls 5 watts? Wow.

[Oliver] has been doing some work to use his TI ez430 Chronos wristwatch for some home automation. He’s working with a RF controllable lightbulb adapter which operates in the 433 MHz band. A dirt-cheap breadboard-friendly transmitter is available from Seeed Studios and he uses this in conjunction with a computer and an Arduino. Before the trolls get to their thing, YES, this is incredible overkill. But remember that he’s prototyping. We hope that if he intends to actually use this setup he’ll migrate to something like an ATtiny2313 running V-USB. Better yet, you should be able to tap into the watch’s companion receiver and cut the computer out completely.

If you’re easily amused you’ll appreciate the video of a light turning on and off after the break. If you’re a little harder to please then take a look at Oliver’s methods of using Python processing for the watch’s data.

Ok, now we’ve seen this watch turning on lights and unlocking doors. What else ‘ya got?

 [Nick] tipped us off about a guide to unlock extra features on Panasonic televisions. The hack works on the G10 models of plasma TVs and uses the service menu to gain access to the EEPROM memory. With a few quick steps you can change some data with a built in hex editor, unlocking several new settings menus, or bricking your entertainment centerpiece. We’ve seen some Samsung TV hacking in the past and hope that with increased processing power in today’s models we’ll someday see consumer TVs available with open-source firmware so that we can integrate of our favorite entertainment software.

Just when you think you’ve heard all you can about the N900 PUSH competition, we have some more news for you.

The original PUSH competition was only for UK members, but now Nokia has introduced the ‘Mod in the USA‘ N900 PUSH competition. Similar to the original, anyone (within region) can submit a cool mod, hack, useful creation that would use the N900. Winners will be selected, and thats when the differences start.

There will be a $10,000 for 1st prize, and smaller prizes for 2nd and 3rd. Plus a trip to Vegas to showcase the 3 winning hacks at CTIA 2010 as well as funding, N900s and support to build the mods.

Don’t have an idea but still want to try? They have a discussion group to get the juices flowing, or you could always discuss in our comments.